Dale's Jet Sports
(972) 530-6768 fax (972)
530-5305
6301 Industrial Lane
Sachse, Texas 75048
dale@dalesjetsports.com
kat@dalesjetsports.com
|
|
|
|
R&D RACING KAWASAKI SXR 800 PERFORMANCE KITS & PARTS |
|||
|
R&D Racing Kawasaki SXR 800 Performer Kit |
MSRP* |
|
||
| R&D Performance
Products Performer Kit is designed to significantly improve SXR handling
and power through the utilization of easy to bolt on aftermarket performance
parts. The Performer Kit includes R&D 6 degree timing advance kit, 29cc
pro series cylinder head kit, ride plate, Aquavein scoop intake grate, pump
shoe seal kit, Solas 13/22 DynaFly impeller, handle pole spring kit, rapid
ratio steering plate and power plenum air filter. Note: the Performer Kit
is designed for use with 92 octane pump gasoline and does not require re-jetting
the carburetor (Jet Ski’s with Factory Pipe Exhaust will require carb re-jetting.)
Increases engine RPM approximately 250 RPM over stock (for peak rpm & speed
R&D recommends boring the factory nozzle 1-2 mm) and top end speed 2-3 MPH. R&D Performance Products Performer Kit includes R&D Kawasaki SXR Ride Plate Part Number 121-80000 R&D Kawasaki SXR Aquavein Intake Grate Part Number 111-80000 R&D Kawasaki SXR Pump Shoe Seal Kit Part Number 161-80000 R&D Kawasaki 6 Degree Timing Advance Kit Part Number 441-75001 R&D Kawasaki SXR 29cc Pro Series Head Kit Part Number 411-80029 R&D Kawasaki Power Plenum Air Filter Kit Part Number 200-00800 Solas DynaFly 13/22 Impeller Part Number 131-01322 R&D Kawasaki SXR Handle Pole Spring Kit Part Number 521-80000 R&D Rapid Ratio Steering Plate Kit Part Number 521-80010 |
$1,165.25 |
Approx. 2-3 MPH Improvement Over Stock* |
||
|
Average Stock SXR 800 Top Speed***
49 mph @ 6,850 RPM |
|
|||
|
|
||||
|
R&D Racing Kawasaki SXR 800 Stage I Kit |
||||
|
R&D Performance Products
Stage I Kit is designed to significantly improve SXR handling and power
through the utilization of easy to bolt on aftermarket performance parts.
The Performer Kit includes R&D 6 degree timing advance kit, 29cc pro series
cylinder head kit, reed valve stuffers, reed valve spacers, ride plate,
Aquavein scoop intake grate, pump shoe seal kit, Solas 14/23 DynaFly impeller,
handle pole spring kit, rapid ratio steering plate, power plenum air filter
and Factory Pipe exhaust. Note: the Kawasaki SXR 800 Stage I Kit is designed
for use with 92 octane pump gasoline and will require carburetor re-jetting.
Increases engine RPM approximately 500 RPM over stock (for peak rpm & speed
R&D recommends boring the factory nozzle 1-2 mm) and top end speed 5-6 MPH. |
$2,049.06 | Approx. 5-6 MPH Improvement Over Stock* | ||
|
Average Stock SXR 800 Top Speed***
49 mph @ 6,850 RPM |
||||
|
|
||||
|
|
||||
|
R&D Racing SXR 800 Timing Advance Kit |
||||
|
Designed to work with the factory ignition system, the R&D timing kit allows a full 6 degree of ignition advance timing for substantially improved performance. Easy to install and comes complete with gasket and necessary installation hardware. |
Click to View |
PN# 441-75001 |
||
|
|
||||
|
R&D Racing SXR 800 Rapid Turn Ratio Steering Plate |
||||
| The Rapid Ratio Steering Plate for the Kawasaki 800 SXR was developed to provide increased turning ratio through three adjustable steering cable positions - Chose from Stock, plus 8 mm and plus 16mm positions. The steering plate also allows the entire plate to be relocated 1 inch forward with the R&D Racing Steering Subshaft Part number 521-80020 | Click to View |
PN# 521-80010 |
||
|
SXR 800 Afterburner Pump Core & Adjustable Cone |
||||
| The R&D Watercraft Afterburner pump core transforms the factory Kawasaki jet pump into a high performing large hub, high pressure axial design. The large hub pump core and adjustable pump cone kit improves hole shots while providing up to 1 MPH in top end speed. The Afterburner is tunable via shims that allow precise tuning for any brand of impeller. The Afterburner Pump Core & Adjustable cone is available for 1992 through 2006 Kawasaki 750 & SXR 800 Stand-ups. | Click to View |
PN# 161-00801 |
||
|
SXR 800 Pro Super Stock Pump Cone |
||||
| Designed specifically for super stock SX-R’s, the R&D pump cone bolts to the R&D Afterburner Pump Core Sleeve. The pump cone comes with 2 tuning shims. | Click to View |
PN# 161-00803 |
||
|
SXR 800 Rear Sponson Kit |
||||
| The R&D rear sponson kit mounts below the blond flange at the rear of the Kawasaki SX-R. The sponsons improve overall watercraft handling and responsiveness especially in rougher water conditions. |
PN# 121-00800 |
|||
|
SXR Pro Series Cylinder Heads |
||||
| Pro Series SXR 800 Kawasaki heads are cast aluminum with an internal gusseting design that adds strength so the head will not lift under compression. Sure Seal O ring combustion chambers and silicon sealed water jacketing eliminates blown head gaskets. The cast design incorporates cylinder girdle mounts along with enlarged water jacketing for cooling down those high horse power motors. Available in 23cc to 29cc. |
PN# 231-75146 |
|||
|
|
||||
|
SXR 800 Ride Plate |
||||
| Cast aluminum R&D Watercraft ride plate offers redesigned bottom for improved stability and superior corning capabilities. Revised negative plain angle lightens the nose of the watercraft and allows for up to 1 MPH gain in top end speed. | Click to View |
PN# 121- 80000 |
||
|
SXR Pro Series Ride Plate |
||||
| The R&D Pro Series Ride Plate features a lower plaining surface with a redesigned rear contour shape to deliver reduced porposing, better high speed stability and overall handling. The Pro ride plate works with aftermarket jet pumps and drop nozzle kits. | Click to View |
PN# 121-80001 |
||
|
|
||||
|
SXR 800 Aquavein Intake Grate |
||||
| Patented dual wing design with deep channel rails eliminate cavitation and allow for quicker acceleration with improved speed and handling. Designed to be used with the R&D SXR 800 ride plate Part Number 121-8000 other ride plates may require modification. | Click to View | PN#111-80000 | ||
|
SXR Aquavein Stealth Pro Intake Grate |
||||
| The new Stealth Series Kawasaki SX-R 800 intake grate features a three wing design with a deeper center rear pickup and wider design near the rear side pickup. The Stealth delivers the ultimate in jet pump hookup, high speed stability and cornering with improved off throttle braking. The Stealth intake grate is an updated version of the R&D grate that has dominated the Pro and Expert Stand-up classes at the IJSBA World Finals for over a decade. | Click to View | PN# 111-80001 | ||
|
SXR Pump Shoe Seal Kit |
||||
| The pump shoe seal kit for the Kawasaki 750 & 800 stand-up feature molded plugs to seal up air pocket cavities in the stock Kawasaki jet pump shoe. Removing theses cavities reduces the opportunities for jet pump cavitation. | Click to View | PN# 161-80000 | ||
|
Rule SXR Bilge Pump Mounting Bracket |
||||
| The Rule bilge pump mounting bracket securely holds your bilge pump even during in the roughest riding. For use with Rule Industries bilge pumps – Click here for more information on bilge pumps | PN# 660-80000 | |||
|
|
||||
|
SXR 800 Reed Stuffers |
||||
| R&D stuffer is designed to drop into the OEM reed valve and create a blue printed match between the OEM manifold and reed valve. Stuffing up the reed eliminates air turbulence, creating maximum airflow, improved velocity to the intake ports, and allows the engine to pull more fuel through bottom and mid range rpm. Producing crisp throttle response and increased bottom and mid power. (For OEM intake manifold order Part Number 271-75001). | Click to View | PN# 271-75000 | ||
|
SXR 800 Reed Valve Spacers |
||||
| The R&D reed valve spacer kit for the Kawasaki SX-R relocates the reed valves for an increased intake track length. The reed spacers help increase low end acceleration and are highly recommended for use with Factory Pipe exhaust systems. Part Number 251-75010 and Part Number 251-80000 Angled Reed Spacers | Click to View | |||
|
SXR 800 Monster M-16 Reed Valve & Intake Manifold |
||||
| The R&D Racing 16 port Monster Reed valves provide instant throttle response, increased acceleration, and up to 20% grain in horsepower. Kit includes R&D SXR intake manifold. | Click to View | PN# 261-20750 | ||
|
SXR 800 Power Plenum Air Filters |
||||
| The R&D Power Plenum for the Kawasaki SXR 800 is dyno tested and championship proven. Power Plenum Air Filters generate the maximum airflow and volume, period. Which means more horsepower, increased throttle response, acceleration and top speed. The exclusive lightweight R&D design incorporates velocity stacks and is engineered to improve air speed. The unique Pro-Lock base allows for quick removal, for those last minute carb adjustments. (For OEM Kawasaki carburetors order Part Number 200-00800, for aftermarket carbs with 120mm center-to-center order Part Number 200-00120). | Click to View | |||
|
|
||||
|
SXR 800 Intake Manifold |
||||
| Mikuni Super BN 46mm Intake Manifold is built with 120mm carb centers (exact engine centers) is designed to match the OEM Reed Valve with R&D Reed Stuffers Part Number 271-75000. Made from cast aluminum this intake manifold makes it easy to mount larger carburetors to the SXR 800. | Click to View |
PN# 231-75146 |
||
| R&D Racing Kawasaki 800 SXR 44/46mm Mikuni Dual Intake Manifold with billet carburetor plate (120mm Centers) is designed to match the MOTO TASSAMARI V-Force Reed | Click to View |
PN# 231-75148 |
||
|
|
||||
|
SXR 800 Exhaust Power Sleeve |
||||
| The R&D Racing Billet Aluminum Kawasaki 800 SXR Exhaust Power Sleeve installs in to the stinger of the stock SXR exhaust to increase back pressure for increased top end speed and up to 100 additional RPM | Click to View |
PN# 331-80000 |
||
|
|
||||
| * Prices last reviewed 3/06 are subject to change without notice. Kawasaki SXR 800 Performance and Stage I Kit installation service is available on any of the above items. We carry the full line of R & D Racing Products and all performance kit parts listed above are also available separately. Speed improvement numbers are from R&D Racing Products. | ||||
Home Products & Accessories Watercraft Repair Services FAQ Technical What's New PWC For Sale Gallery PWCSites
|
|
