Dale's Jet Sports
(972) 530-6768 fax (972)
530-5305
6301 Industrial Lane
Sachse, Texas 75048
dale@dalesjetsports.com
kat@dalesjetsports.com
|
|
|
|
R&D RACING YAMAHA SUPERJET PERFORMANCE PARTS |
|||
|
SuperJet Handlepole Lowering Mount |
Call For Pricing |
|
||
|
No need for a shorter aftermarket handle pole. The anodized CNC billet aluminum R&D handlepole mount lowers the Super Jet handle pole pivot point 1 inch and moves the pivot point forward 3/4 of an inch to help reduce nose bounce or porpoising. Carve tighter turns with better high speed control. Built-in spring pre-loader reduces handle pole weight. SuperJet 96+ Part Number# 652-70102 |
|
|||
|
|
|
|||
|
Aquavein Pro2 Double Deep Intake Grate |
||||
|
The SuperJet Pro 2 Double Deep Aquavein Intake Grate steps up the performance of our already dominant Pro 2 by incorporation the latest technology from R&D Racing. The new Pro 2 Double Deep will launch your SuperJet into the 21st century of scoop grate performance and is designed to work with the R&D stuffer and aluminum pump shoe. For SuperJet 1996+ Part Number# 112-70105 |
 |
|||
|
|
||||
|
SuperJet Limited Race Intake Grate |
||||
|
The R&D Limited Race Grate combines the design elements of the R&D aluminum Pump Shoe (not Limited Legal) with the performance advantages of the R&D Pro 2 Double Deep Aquavein to create the ultimate Limited Race Intake Grate. The Increased pick up area of the lowered rear chip produces down force to the nose of the watercraft to reduce porpoising. The R&D Stuffer is also compatible with this design to add 1 1/2 to 2 mph to your top end speed. For SuperJet 1996+ Part Number#112-70106 |
 |
|||
|
|
||||
|
NOT AVAILABLE S-One Aquavein & Pump Stuffer |
||||
|
The S-one Aquavein & Pump Stuffer for the Yamaha SuperJet is uniquely manufactured to deliver maximum hook-up with zero cavitation and a guaranteed 2-3 mph top speed gain. SuperJet 1996+ S1 Stuffer Kit Part Number# 112-70103, Pump Stuffer only Part Number112-70203 |
 |
|||
|
|
||||
|
NOT AVAILABLE SuperJet Pump Stuffer |
||||
| The R&D pump stuffer revises the pump cavity shape to increase water velocity and jet pump efficiency. The stuffer completely occupies the area from the original pump cavity surface to the new redesigned surface. This helps eliminate air on the backside of the stuffer which will causes cavitation. Up to 2 mph increase in top end speed. Designed to be used with R&D Aquavein Pro2 Double Deep Intake Grate PN# 112-70105 and R&D Limited Race Grate PN# 112-70106 |
 |
|||
|
|
||||
|
SuperJet Pro2 Pump Shoe |
||||
|
The cast aluminum Pro 2 Pump Shoe is designed to replace the stock factory plastic unit that is prone to failure when used with a winged intake grate. The Pro2 shoe features a completely redesigned front entrance to efficiently feed water into the jet pump for improved rough water speed, hookup, corning, stability, and overall handling. Part Number# 112-70104
|
 |
|||
|
|
||||
|
SuperJet Front Sponson |
||||
| The Super Jet front sponsons drastically improve the overall stability of your Yamaha allowing you to charge through rough water with confidence. The Super Jet front sponsons affix beneath the Bond Flange and to each side of the hull expanding the footprint of the hull. Kit comes with all mounting hardware. For SJ 96+ PN# 122-70201 |
 |
|||
|
|
||||
|
Engine Control Unit |
||||
|
R&D Racing Engine Control Unit (ECU) provides greater spark energy, higher rev limiter settings and improved ignition timing. The four pre-programmed and switch selectable timing curves were developed to cater to the performance needs of a wide range of superjet engine combinations. The adjustable rev limiter has a limit range from 6400 to 9500 rpm. The Yamaha SuperJet ECU is available in limited PN# 802-00701 and superstock Part Number # 802-00702 versions. |
 |
|||
|
|
||||
|
NOT AVAILABLE SuperJet Rev 2 Dry Pipe |
||||
|
SuperJet REV 2 DRY PIPE Previously available only to in-house team racers, this system produces in excess of 140+ horsepower on a full R&D Superstock racing engine. What does this mean on the water? How about solid 66-67 MPH top end speeds with acceleration that turns heads (and a few stomachs.) R&D Exhaust Technology, Use it and win! Part Number# 332-70102 |
|
|||
|
|
||||
|
Space Maker Hood Insert for Factory Hood |
||||
| R&D Space Maker Hood Insert for the Yamaha OEM Superjet hood, allows you to remove a portion of the factory hood inner liner and foam to gain additional clearance needed for the R&D Dry Pipe. The hood insert installs in about 2 hours with basic hand tools and is sealed with silicone and rivets (sealer & rivets not included.) PN# 652-70110 |
|
|||
|
|
||||
|
Rapid Ratio Turn Plate |
||||
| R&D Rapid Ratio
Steering is designed to allow rotational handlebar adjustments to reduce
wrist fatigue and increase comfort and control. 4 point adjustable pivot
position improves turning radius. Sold exclusively with the new R&D Arrow
Tapered Handlebars (0°, 6°, or 10°) and anodized for corrosion resistance.
Available for all Yamaha SJ stand up watercraft. 0 degree steering system Part Number # 512-70100 6 degree steering system Part Number # 512-70106 10 degree steering system Part Number # 512-70110 |
|
|||
|
|
||||
| R&D Racing Yamaha Superjet Performer Kit Click Here | ||||
|
R&D Racing Yamaha Superjet Stage I Performance Kit Click Here |
||||
|
R&D Racing Yamaha Superjet Stage II Performance Kit Click Here |
||||
| R&D Racing Yamaha Superjet Stage IV Performance Kit Click Here | ||||
Home Products & Accessories Watercraft Repair Services FAQ Technical What's New PWC For Sale Gallery Links
|
|
|
The Home of Bad Attitude Racing |
|
"Ride it like a Rental" |
